IWC Ingenieur 3521 white box with warranty

Item Number: IWC037

$12,427.02 AUD
- Specifications
3521 Year
1996 (Sold)
Automatic Cal.887/2
34mm Material
Stainless Steel
Original Steel Bracelet
Bracelet Length
Approx 18.3cm (Maximum)
Inner Box, Outer Box (Both are damaged), Warranty Paper(Card), Chronometer Certificate Paper, Chronometer Tag, Sales Tag
NotesThe dial and hands have been replaced with Luminova when the watch was serviced by IWC
The watch would be completely serviced by our watchmaker after your order
Delivery will be made after the service is completed. 
1-year Mechanical Warranty by us
Global shipping via FedEx International Priority


One of the representative collections of IWCIngenieur, means "engineer" in German.

The first Ingenieur, born in 1955, was an improved pilot watch Mark XII (Mark 11) for consumer use.

Equipped with a self-winding movement and equipped with a soft iron inner case, it was highly resistant to magnetic fields, shocks, and water resistance.

Since then, there have been several model changes, and although the design is different, the collection continues today.

This watch, Reference 3521, was introduced in 1993 and was produced until around 2001, and is a certified COSC chronometer.

Although it has a simple design without a crown guard, the flowing lines of the case, lugs, and bracelet give a very sophisticated impression.

Some people may have thought this watch looked like a Royal Oak.

That's right, because this watch was designed by Gerald Genta.

Gerald Genta was a designer of luxury sports watches such as Patek's Philippe Nautilus and Audemars Piguet's Royal Oak, and he had a great influence on subsequent watch designs.

From the Ingenieur SL Reference 1832 in 1976, the Genta design was adopted, and the thin design continued until this Reference 3521.

Since the Ingenieurs from the 2000s onwards have a so-called thick design, they give a very different impression, even though they are the same collection.

In recent years, vintage Nautilus and Royal Oak have become very expensive and hard to come by, but this Ingenieur has received a lot of attention because it was not as high-end as those two companies. didn't come

However, interest in the Ingenieur is increasing due to the fact that the above-mentioned watch has become too expensive and the fact that designer Gerald Genta is once again attracting attention worldwide.

The dial is a combination of pure white, gold indexes, and pencil hands for a luxurious feel.

This watch received complete service from IWC in later years, and the dial and hands were replaced by the manufacturer at that time.

Therefore, the indication below 6 o'clock is SWISS MADE, and the luminous paint is luminova.

The movement cal.887/2 equipped with the

is based on Jaeger Lecoultre's cal.889/2.

This cal.889/2 is a thin movement that is also used in Jaeger Lecoultre's Master Control, Audemars Piguet's Royal Oak, and Vacheron Constantin's Patrimony.

The Ingenieur is protected by a soft iron inner case, so you don't have to worry about it being magnetically charged, and you can use it without worrying about shocks during daily use.

In addition to the box and warranty card, this watch also comes as a full set with chronometer certificate and tags. This is extremely rare.

This is a product with various elements such as a luxury sports watch with an integrated bracelet made of SS, which is classified as a luxury sport, a vintage design by Genta, and a full set with a box warranty.

This product will be delivered after overhaul.

In principle, we do not polish, but we can handle it separately if you wish.

One year warranty after work.

[Payment Method]
1. Credit Card (Visa/Master/Amex)
2 Wire/Bank Transfer
*We have U.S bank account and European bank account. So you don't need to transfer internationaly.

Shipped via FedEx International Priority.
Normally,Item will be shipped in 1-2 working days after payment received.

Tracking number will be provided, and insurance will cover if the item is damaged or missing in the shipping process.

[Custom Duty]
International buyer has a responsibility to pay import duties, taxes or charges. (ex VAT/GST)

We do not accept to declare lower value on shipping label or invoice.We will declare full value of them.

If you would like to know how much it will be, please check approximate cost below.
Import Duty Calculator - SimplyDuty

These costs normally collected by courier when you pick up item or after your receive.

We accept return in the case of shipping mistake or item defect in 14 days after your receive.

  1. Can I check the actual item at the store?
    -Yes, You can check it at the store.

  2. Can I ask reserve the watch?
    -No, we do not reserve a watch until payment completed because we also sell our products on online store.

  3. Can you adjust my bracelet? 
    -Yes,If you indicate your approximate arm circumference when you place an order, we will adjust it and send it to you.
    (*Riveted bracelets and Folded bracelets need to be adjusted by our watchmaker, so please allow a little time for this.)

  4. How long does it take for "delivery after service"?
    -Please allow approximately 1month to 1.5 months from the time of order.
    (*It may take a little longer depending on the schedule of the wacthmaker and the number of customers.)

  5. Is there a payment deadline? (Bank transfer)
    -If we cannot confirm your payment within 2 days of your order, we will cancel your order.

  6. Can I order by cash on delivery?
    -No, we do not accept cash on delivery.
  7. Do you accept installment payments or BNPL(Buy Now Pay Later)?
    -No, We do not support installment payments or BNPL.
  8. Do you ship internationally?
    -Yes, we ship via FedEx International Priority.
    (*Customs duties and import taxes are the responsibility of the customer, so please pay them upon or before receiving the package.)
About Service
Service(Overhaul) is the process of disassembling a mechanical product down to its component parts, cleaning, and reassembling it to bring it back to the state of performance when it was new.

The overhaul procedure is roughly explained as follows
Separate the case and movement.
Disassemble the movement
Inspect each part for wear and tear and perform a preliminary cleaning.
Cleaning by a special machine
Lubrication and assembly
6. Water-resistance inspection (water-resistance function guaranteed)
7. Adjustment and running test
This is the process of the watchmaking process.

Some movements consist of several hundred parts, which are disassembled piece by piece, inspected, cleaned, and reassembled in an extremely precise process.

Without overhaul, just like a car, the oil deteriorates and the risk of wear and tear on the parts increases, causing a loss of precision or, in serious cases, the inability to run.

We recommend an overhaul every two to three years to ensure economical and long-lasting use of your watch.

About new finishing (polishing)

Vintage watches have been used for decades, and even the stainless steel used in many watches has become rounded at the corners, or has many small scratches on the surface that should be beautiful with a mirror finish.

At Albitro, we believe that our watches should be purchased in beautiful condition and used for a long time, so we sell them with a new finish.

Especially for dress watches with gold cases, we finish them to bring out the best of the precious metal case.

The watches sold at Albitro that have been newly finished are photographed in very high resolution, so you can see the edges are sharp and the mirror finish reflects the light.

Some cases and bracelets have a mixture of mirror and hairline finishes, but not many craftsmen are able to distinguish between them and finish them at a high level.

The "thinning of the case" is another area that is highly dependent on the skill of the craftsman. A watch with skinny lugs is far from its original design, and its appearance is unbalanced.

It is a very meticulous process to reduce the thinness of the case as much as possible while eliminating scratches and dents to bring the watch closer to its original finish.

Of course, in some cases, it is better to leave the watch in its original condition as it is, as it is the history of the watch and the original condition is important.

We look at each watch individually and decide whether it is best to finish it before selling it.

You may also like

Recently viewed