IWC Yacht Club 811AD Blue Mable Dial

Item Number: IWC015

$4,765.79 AUD

表示価格は税込み

Brand: IWC
Model: Yacht Club
Ref: 811AD
Serial: 188xxxx
Year: 1967
Movement: Automatic Cal.8541B
Case: 36mm
Material: Stainless Steel
Lug Width: 18mm
Water Resistance: None
Includes: Genuine Bracelet (Gay-Freres)
Bracelet Length: ~17.5cm

【Description】

IWCのヴィンテージにおける代表モデルの一つ、ヨットクラブ。

現在ではポルトギーゼラインの1つとして、スポーツウォッチに属しています。

ヴィンテージのヨットクラブは使い勝手の良いサイズ感、どんな格好やシチェーションでも違和感の無いシンプルなデザインが魅力です。

シンプルを極めたこのヨットクラブのケースデザインはジェラルド・ジェンタ。

オメガのCラインケースに近い、シャツに引っ掛からないデザインは余計なものを削ぎ落としながらも、独特の「艶」や「色気」が感じられます。

リューズは当時の防水ケースを示す、魚マークのリューズです。

そしてこの時計の最大の特徴はブルーマーブル模様のダイアルです。

非常に希少な文字盤で、ブルーのマーブルの他にグリーンのマーブルが存在しています。

マーブル柄だけを見ると少し目立つかな?と思うかもしれませんが、色合いや明るさ・インデックスを含め主張し過ぎないデザインですので悪目立ちはしないと思います。

カレンダー部分も同様の仕上げというのがこだわりが垣間見えます。

搭載ムーブメントは自動巻きのCal.8541B。

Cal.854をベースにデイト表示を加えたCal.8541の改良版です。

ムーブメントも効率よくゼンマイを巻き上げ、ヴィンテージの中でも故障も少ないということでかなり信頼性の高いペラトン式。

ペラトン式とは1950年代にIWCの設計部長だった時計師のアルバート・ペラトンによって開発された自動巻き機構のこと。

初めて開発されたCal.85から最終型のCal.854まで基本的な設計は同じというほど完成された機械の最終形です。

ゲイフレアー社製の純正ブレスレットが付属します。(17.5cm程度まで対応可能)

ゲイフレアー(Gay-Freres)はロレックスの初代ブレスレットのサプライヤーで、オーデマ ピゲのロイヤルオークやゼニス エル・プリメロのブレスレットを手掛けたメーカーとして知られています。

ドイツ国境に近いシャフハウゼンに本拠地を置くIWCならではの質実剛健さ、ジェラルド・ジェンタによる美しく実用的なデザインが共存した1本です。

リューズ付近のケース下部分に1ヶ所小さなアタリがあります。目立つものでは無いのでそこまで気にならないかと思います。

【Warranty】

※現在、日差 ±2秒とかなり調子は良いですが、安心してお使い頂けるようにオーバーホールをした後のお渡しとなります。

ご注文後、約4週間後のお渡し予定です。

オーバーホール後、1年保証となります。

オーバーホールの作業内容についてはこちらをご覧下さい。


【Description】

The Yacht Club is one of the flagship models of IWC’s vintage.

Today, the Yacht Club is part of the Portuguese line of sports watches.

The vintage Yacht Club is an attractive timepiece with a handy size and a simple design that makes it suitable for any outfit or situation.

The case design of this yacht club, which is the ultimate in simplicity, is by Gerald Genta.

The design of this watch is similar to Omega’s C-line case, which does not get caught on the shirt, and it has a unique “luster” and “sex appeal”.

The crown is a fish-marked crown, indicating the water-resistant case of the time.

The most distinctive feature of this watch is the blue marble dial.

It is a very rare dial, and in addition to the blue marble, there is also a green marble.

There is a little bit of military like camo pattern, but the design is not too assertive, including the indexes, so it won’t stand out.

It is glimpsed that the calendar part is finished in the same way, too.

The movement is Cal.8541B with automatic winding.

It is the improved version of Cal.8541 that added the date display based on Cal.854.

The Pellaton movement is also very reliable because it winds the spring efficiently and has few failures among the vintage models.

The Pellaton system is a self-winding mechanism developed in the 1950s by Albert Pellaton, a watchmaker who was the head of IWC’s design department.

It is the final form of a perfected mechanical system, so perfected that the basic design is the same from the first cal. 85 to the final cal. 854.

The watch comes with a genuine Gayflare bracelet. (It can accommodate up to about 17 cm.)

Gay-Freres was the supplier of the first Rolex bracelet and is best known as the maker of the Audemars Piguet Royal Oak and Zenith El Primero bracelets.

It combines the robustness of the Schaffhausen-based company near the German border with the beautiful and practical designs of Gerald Genta.

There is a small bruise on the lower part of the case near the crown. It’s not very noticeable, so it’s not that bad.

【Warranty】

The watch would be completely serviced by our watchmaker after your order.
It takes about 4 weeks to complete. It comes with 1-year warranty.

[Payment Method]
1. Credit Card (Visa/Master/Amex)
2 Wire/Bank Transfer
*We have U.S bank account and European bank account. So you don't need to transfer internationaly.

[Delivery]
Shipped via FedEx International Priority.
Normally,Item will be shipped in 1-2 working days after payment received.

Tracking number will be provided, and insurance will cover if the item is damaged or missing in the shipping process.

[Custom Duty]
International buyer has a responsibility to pay import duties, taxes or charges. (ex VAT/GST)

We do not accept to declare lower value on shipping label or invoice.We will declare full value of them.

If you would like to know how much it will be, please check approximate cost below.
Import Duty Calculator - SimplyDuty

These costs normally collected by courier when you pick up item or after your receive.

[Return]
We accept return in the case of shipping mistake or item defect in 14 days after your receive.

  1. Can I check the actual item at the store?
    -Yes, You can check it at the store.

  2. Can I ask reserve the watch?
    -No, we do not reserve a watch until payment completed because we also sell our products on online store.

  3. Can you adjust my bracelet? 
    -Yes,If you indicate your approximate arm circumference when you place an order, we will adjust it and send it to you.
    (*Riveted bracelets and Folded bracelets need to be adjusted by our watchmaker, so please allow a little time for this.)

  4. How long does it take for "delivery after service"?
    -Please allow approximately 1month to 1.5 months from the time of order.
    (*It may take a little longer depending on the schedule of the wacthmaker and the number of customers.)

  5. Is there a payment deadline? (Bank transfer)
    -If we cannot confirm your payment within 2 days of your order, we will cancel your order.

  6. Can I order by cash on delivery?
    -No, we do not accept cash on delivery.
  7. Do you accept installment payments or BNPL(Buy Now Pay Later)?
    -No, We do not support installment payments or BNPL.
  8. Do you ship internationally?
    -Yes, we ship via FedEx International Priority.
    (*Customs duties and import taxes are the responsibility of the customer, so please pay them upon or before receiving the package.)
About Service
Service(Overhaul) is the process of disassembling a mechanical product down to its component parts, cleaning, and reassembling it to bring it back to the state of performance when it was new.

The overhaul procedure is roughly explained as follows
Separate the case and movement.
Disassemble the movement
Inspect each part for wear and tear and perform a preliminary cleaning.
Cleaning by a special machine
Lubrication and assembly
6. Water-resistance inspection (water-resistance function guaranteed)
7. Adjustment and running test
This is the process of the watchmaking process.

Some movements consist of several hundred parts, which are disassembled piece by piece, inspected, cleaned, and reassembled in an extremely precise process.

Without overhaul, just like a car, the oil deteriorates and the risk of wear and tear on the parts increases, causing a loss of precision or, in serious cases, the inability to run.

We recommend an overhaul every two to three years to ensure economical and long-lasting use of your watch.


About new finishing (polishing)

Vintage watches have been used for decades, and even the stainless steel used in many watches has become rounded at the corners, or has many small scratches on the surface that should be beautiful with a mirror finish.

At Albitro, we believe that our watches should be purchased in beautiful condition and used for a long time, so we sell them with a new finish.

Especially for dress watches with gold cases, we finish them to bring out the best of the precious metal case.

The watches sold at Albitro that have been newly finished are photographed in very high resolution, so you can see the edges are sharp and the mirror finish reflects the light.

Some cases and bracelets have a mixture of mirror and hairline finishes, but not many craftsmen are able to distinguish between them and finish them at a high level.

The "thinning of the case" is another area that is highly dependent on the skill of the craftsman. A watch with skinny lugs is far from its original design, and its appearance is unbalanced.

It is a very meticulous process to reduce the thinness of the case as much as possible while eliminating scratches and dents to bring the watch closer to its original finish.

Of course, in some cases, it is better to leave the watch in its original condition as it is, as it is the history of the watch and the original condition is important.

We look at each watch individually and decide whether it is best to finish it before selling it.

You may also like

Recently viewed