ROLEX Datejust 16014 White Roman SS/WG

Item Number: ROLEX121

$6,664.87 AUD

ステンレスケースに18Kホワイトゴールド製のフルーテッドベゼルを備えたデイトジャスト Ref.16014。

ポーセリンのような質感のホワイトダイアルにアプライドのローマンインデックスと珍しい組み合わせです。1987年製。

ロレックスを代表する自動巻き時計のデイトジャスト。その特徴的な外観から誰が見てもひと目でわかる時計として広く知られています。

日付が0時に瞬時に変わる「デイトジャスト機構」は「オイスターケース」と自動巻きの「パーペチュアル機構」とともにロレックスの3大発明とされ、このデイトジャストはそれらを全て備えた集大成とも言えるモデルです。

このRef.16014は1977年頃に登場し1988年頃まで生産され、Ref.16234の1つ前の世代に当たります。

フルーテッドベゼル、ジュビリーブレスレット、バーインデックスという1960年代に確立されたデイトジャストの基本デザインを踏襲しています。

同時期のRef.16030と非常に似ていますが、16030はエンジンターンドベゼルになっており、その点が異なります。

ステンレススティール(SS)とホワイトゴールド(WG)のコンビネーションデザインで、カッティングの美しいフルーテッドベゼルが18Kホワイトゴールド製と、さり気ないラグジュアリー感がある時計です。

ステンレススティールとゴールドのコンビネーションはロレックスでは「ロレゾール」という名で登録されており、そのルールに則るとこちらは「ホワイトロレゾール」という名称ですが、一般的には「コンビ」と言われます。

ポーセリンのような透き通ったホワイトダイアルにアプライドのローマンインデックスがこの時計の最大の特徴です。

ローマンインデックスには内側にブラックの線が入っており、かなり珍しいデザインでは無いかと。

ダイアルの質感、プリントのブラックの質感は良くあるホワイトダイアルのものとは違いますのでぜひ近接撮影の写真でご覧下さい。

控えめなシルバーのバーハンドが文字盤のデザインを際立たせているようにも感じます。

前世代のモデル Ref.1601からはデザイン面の変更は無く、搭載ムーブメントが変わったのみです。

搭載ムーブメントはCal.3035。ロレックスのメンズ用としては初のハイビート(28,800振動)となり、より精度の向上が図られました。

また、カレンダーの早送り調整が可能になり、実用性が増したことも特徴の一つです。

この時計のほか、サブマリーナー Ref.16800/168000にも使用されました。

ブレスレットはジュビリーブレスレット 62510Hが付属します。クラスプコードからブレスレットは同年代(1985年)と分かります。

18.5cmの腕周りまでで装着可能です。

ブレスレットの伸びは若干はありますが、年代を考えると少ないです。

Airy’sさんにてオーバーホール済み。1年保証となります。

オーバーホール時に磨き済み(新品仕上げ済み)

Model Wrist Size: 16.5cm


-Specifications

Brand: ROLEX
Model: Oyster Perpetual Datejust
Ref: 16014
Serial: R59xxxx
Year: 1987
Movement: Automatic Cal.3035
Case: 36mm
Material: SS/WG
Lug Width: 19mm
Water Resistance: 100m
Includes: Jubilee bracelet 62510H/555B End Links (Clasp Code J)
Bracelet Length: 22 Links (-18.5cm)

Completely serviced by our watchmaker
The case and bracelet has been polished
1-year Mechanical Warranty
Global shipping via FedEx International Priority

 

[Payment Method]
1. Credit Card (Visa/Master/Amex)
2 Wire/Bank Transfer
*We have U.S bank account and European bank account. So you don't need to transfer internationaly.

[Delivery]
Shipped via FedEx International Priority.
Normally,Item will be shipped in 1-2 working days after payment received.

Tracking number will be provided, and insurance will cover if the item is damaged or missing in the shipping process.

[Custom Duty]
International buyer has a responsibility to pay import duties, taxes or charges. (ex VAT/GST)

We do not accept to declare lower value on shipping label or invoice.We will declare full value of them.

If you would like to know how much it will be, please check approximate cost below.
Import Duty Calculator - SimplyDuty

These costs normally collected by courier when you pick up item or after your receive.

[Return]
We accept return in the case of shipping mistake or item defect in 14 days after your receive.

  1. Can I check the actual item at the store?
    -Yes, You can check it at the store.

  2. Can I ask reserve the watch?
    -No, we do not reserve a watch until payment completed because we also sell our products on online store.

  3. Can you adjust my bracelet? 
    -Yes,If you indicate your approximate arm circumference when you place an order, we will adjust it and send it to you.
    (*Riveted bracelets and Folded bracelets need to be adjusted by our watchmaker, so please allow a little time for this.)

  4. How long does it take for "delivery after service"?
    -Please allow approximately 1month to 1.5 months from the time of order.
    (*It may take a little longer depending on the schedule of the wacthmaker and the number of customers.)

  5. Is there a payment deadline? (Bank transfer)
    -If we cannot confirm your payment within 2 days of your order, we will cancel your order.

  6. Can I order by cash on delivery?
    -No, we do not accept cash on delivery.
  7. Do you accept installment payments or BNPL(Buy Now Pay Later)?
    -No, We do not support installment payments or BNPL.
  8. Do you ship internationally?
    -Yes, we ship via FedEx International Priority.
    (*Customs duties and import taxes are the responsibility of the customer, so please pay them upon or before receiving the package.)
About Service
Service(Overhaul) is the process of disassembling a mechanical product down to its component parts, cleaning, and reassembling it to bring it back to the state of performance when it was new.

The overhaul procedure is roughly explained as follows
Separate the case and movement.
Disassemble the movement
Inspect each part for wear and tear and perform a preliminary cleaning.
Cleaning by a special machine
Lubrication and assembly
6. Water-resistance inspection (water-resistance function guaranteed)
7. Adjustment and running test
This is the process of the watchmaking process.

Some movements consist of several hundred parts, which are disassembled piece by piece, inspected, cleaned, and reassembled in an extremely precise process.

Without overhaul, just like a car, the oil deteriorates and the risk of wear and tear on the parts increases, causing a loss of precision or, in serious cases, the inability to run.

We recommend an overhaul every two to three years to ensure economical and long-lasting use of your watch.


About new finishing (polishing)

Vintage watches have been used for decades, and even the stainless steel used in many watches has become rounded at the corners, or has many small scratches on the surface that should be beautiful with a mirror finish.

At Albitro, we believe that our watches should be purchased in beautiful condition and used for a long time, so we sell them with a new finish.

Especially for dress watches with gold cases, we finish them to bring out the best of the precious metal case.

The watches sold at Albitro that have been newly finished are photographed in very high resolution, so you can see the edges are sharp and the mirror finish reflects the light.

Some cases and bracelets have a mixture of mirror and hairline finishes, but not many craftsmen are able to distinguish between them and finish them at a high level.

The "thinning of the case" is another area that is highly dependent on the skill of the craftsman. A watch with skinny lugs is far from its original design, and its appearance is unbalanced.

It is a very meticulous process to reduce the thinness of the case as much as possible while eliminating scratches and dents to bring the watch closer to its original finish.

Of course, in some cases, it is better to leave the watch in its original condition as it is, as it is the history of the watch and the original condition is important.

We look at each watch individually and decide whether it is best to finish it before selling it.

You may also like

Recently viewed